Tips To Fix It Plumbing Yourself

Yes, you can fix-it plumbing yourself. Repairing your plumbing is not a tough task as soon as the problem is simple. If there is a complicated repairing need, you are strongly recommended to take the services of a professional plumber.

Equipments required You need certain equipment to fix-it plumbing yourself. This equipment include hand plumbers tape, small gas torch, solder, flux, plumbing sandpaper, pipe cutter, gas tape (to seal gas line), and maybe some pipe glue.

Procedure Follow the procedure as mentioned below in order to fix-it plumbing yourself.

• The very first thing you need to do is that as soon as you realize that the old water heater has to go, start draining it, turn off the main water valve, and open up all of the faucets to eliminate any pressure. Always remember that it can take several hours to drain.

• If the unit is a gas unit, you should turn off the main gas line in the house; f it is electric, turn off the breaker.

• While you fix-it plumbing yourself, you should try to purchase the same unit in order to prevent yourself from adding pipe and new valves.

• Now, size up the job and disconnect the tank from the water pipes, gas line, or the electrical connection. If it is gas, you should disconnect the flue as well.

• Make sure that you save all parts in order to match them up when you purchase your supplies.

• Once you have disconnected the tank, remove it from your workspace.

Thus, here we see how easy it is to fix-it plumbing you.

William Samson has written many more articles about kitchen and bathroom plumbing.

Yoga Books Member Workoutus

Wireless Network Trouble Shooting

Wireless Network Trouble Shooting

1. Wireless Adapter First check to see if your wireless adapter is on and working properly. If you are using a PCMICA wireless adapter ensure that the card is pressed completely in. If the wireless adapter card was not plugged in when you started your laptop you may want to restart your computer for a fresh start. If you are using a laptop with a built in wireless adapter. What Wireless Network Check the bottom right hand task bar to see if you are connected to a wireless network. Many people are connected to the wrong wireless network with a weak signal or hardly any connectivity. You want to change your wireless adapter setting to choose Infrastructure access points only so youre not connecting to rogue wireless access points.

3. SSID and ME Next check your wireless settings for the following: DO you have the correct SSID typed in, is your encryption key typed in correctly, does your wireless router and wireless adapter have the same security settings.

4. DHCP ME If you dont have a manual TCP/IP address then your wireless router needs to have its DHCP server turned on. Connected to your web interface and turn on your DHCP server. Next go to your wireless network icon in the bottom right hand corner and disable your wireless adapter and then enable it. This will renew your DHCP request to the routers DHCP server.

5. PING!- Next we will use a command line function called PING. type cmd in the run box, this will bring up your DOS window. Now type in ping and then type in the TCP/IP addressof your default gateway. If you have not changed it your default gateways ip address should be 192.168.1.1 or 192.168.0.1. If you receive a reply then you know that you are connected properly to your router.

6. WWWWHAT Now try and surf the web. Go to google.com or another simple page. If nothing comes up then you might have a manually configured IP address with the correct DNS servers entered. Connect to your wireless routers web interface and check the status. You are looking for the multiple DNS server IP address. Copy these IP addresses into you adapters TCP/IP settings and hit ok.

7. Google ME Once your DNS servers are entered you should be able to surf the net. If you still cant surf the net try restarting your computer and check you cables again to make sure you havent missed something.

Yoga Meditation Centre